CLASS 8 : SCIENCE : Electricity: Magnetic and Heating effects
CLASS 8
SCIENCE
Chapter
: 4
Electricity:
Magnetic and Heating effects
Q1.
What is Electricity?
Ans.
Electricity is a form of energy which is used for
cooking, lighting, transportation, heating and cooling, entertainment, communication
and others.
Q1. विद्युत क्या है?
उत्तर: विद्युत
ऊर्जा का एक रूप है जिसका उपयोग खाना पकाने, प्रकाश व्यवस्था, परिवहन, हीटिंग और कूलिंग, मनोरंजन, संचार और अन्य कार्यों के लिए किया जाता है।
Q2.What
is Electric Circuit?
Ans.
A closed path through which an electric current flows
is called an electric circuit.
There are two types of Electric
circuit:
A Open Circuit
B Close Circuit
प्रश्न
2. विद्युत परिपथ क्या है?
उत्तर: एक
बंद पथ जिससे होकर विद्युत धारा प्रवाहित होती है, उसे विद्युत परिपथ कहते हैं।
विद्युत परिपथ दो प्रकार
के होते हैं:
A खुला परिपथ
B बंद परिपथ
Q3. What is Open
circuit?
Ans. A circuit in which the continuity is broken due to which the
electric current cannot flow is known as the open circuit.
Q3. खुला
परिपथ क्या है?
उत्तर: एक
ऐसा परिपथ जिसमें निरंतरता टूट जाती है, जिसके कारण विद्युत धारा प्रवाहित नहीं हो सकती, उसे खुला परिपथ कहा जाता है।
Q4. What is
Closed circuit?
Ans. A closed circuit is a complete circuit where the path is
continuous, allowing current to flow.
प्रश्न 4. बंद परिपथ क्या है?
उत्तर: बंद
परिपथ एक पूर्ण परिपथ है जहाँ पथ निरंतर होता है, जिससे धारा प्रवाहित हो सकती है।
Q5. What is Electric
Cell?
Ans. An electric cell is a portable source of electrical energy.
A device that produces electricity from chemicals stored inside it or a device
which is used to produce small amount of
electricity by chemical reactions is known as electric cell.
Q5.
विद्युत सेल क्या है?
उत्तर: विद्युत
सेल विद्युत ऊर्जा का एक पोर्टेबल स्रोत है। एक उपकरण जो अपने अंदर संग्रहीत
रसायनों से बिजली पैदा करता है या रासायनिक प्रतिक्रियाओं द्वारा थोड़ी मात्रा में
बिजली उत्पन्न करने के लिए उपयोग किया जाता है, उसे विद्युत सेल कहा जाता है।
Q6. What is
battery?
Ans. A battery is defined as the combination of two or more
cells.
Q6. बैटरी
क्या है?
उत्तर: बैटरी
को दो या दो से अधिक सेलों के संयोजन के रूप में परिभाषित किया जाता है।
Q7. What is
Electrical Switch?
Ans. An electrical switch is an electrical component that breaks
or closes an electric circuit.
Q7.
विद्युत स्विच क्या है?
उत्तर: विद्युत
स्विच एक विद्युत घटक है जो विद्युत परिपथ को तोड़ता या जोड़ता है।
Q8. What is
Electric Lamp?
Ans. An electric lamp is a device that gives light when
electricity passes through it.
प्रश्न 8. इलेक्ट्रिक लैंप क्या है?
उत्तर:
इलेक्ट्रिक लैंप एक ऐसा उपकरण है जो बिजली प्रवाहित होने पर प्रकाश देता है।
Q9.What is Cell
Holder?
Ans. Cell holder is a simple device in which more than one cell
can be placed properly to form a battery.
प्रश्न 9. सेल होल्डर क्या है?
उत्तर: सेल
होल्डर एक सरल उपकरण है जिसमें बैटरी बनाने के लिए एक से अधिक सेल को सही ढंग से
रखा जा सकता है।
Q10. What is Conductor?
Ans. A conductor or electrical conductor is a substance or
material that allows electricity to flow through it.
Example: Copper, silver, gold, etc.
Q10.
चालक क्या है?
उत्तर: चालक
या विद्युत चालक वह पदार्थ या सामग्री है जो अपने माध्यम से बिजली को प्रवाहित
होने देता है।
उदाहरण: तांबा, चांदी, सोना, आदि।
Q11.What is
Insulator?
Ans. An insulator is a material that resists or blocks the flow
of electricity or heat.
Example : Plastic, rubber, ceramics, etc
Q11.
इंसुलेटर क्या है?
उत्तर:
इंसुलेटर एक ऐसा पदार्थ है जो बिजली या गर्मी के प्रवाह को रोकता है।
उदाहरण: प्लास्टिक, रबर, सिरेमिक आदि।
Q12. Why wires
are covered with insulators?
Ans. Wires are covered with insulators to protect us from
electric shocks.
Q12.
तारों को इंसुलेटर से क्यों ढका जाता है?
उत्तर: हमें
बिजली के झटकों से बचाने के लिए तारों को इंसुलेटर से ढका जाता है।
Q13.
What is magnetic effect of electric current?
Ans.
When an electric current flows through a conductor
like a wire, it produces a magnetic field around it. This phenomenon is called
the magnetic effect of electric current.
Q13. विद्युत
धारा का चुंबकीय प्रभाव क्या है?
उत्तर: जब
किसी चालक (जैसे तार) से विद्युत धारा प्रवाहित होती है, तो यह अपने चारों ओर एक
चुंबकीय क्षेत्र उत्पन्न करती है। इस परिघटना को विद्युत धारा का चुंबकीय प्रभाव
कहा जाता है।
Q14.
Write the applications of Magnetic effect of electric current?
Ans.
The magnetic effect of electric current has numerous
practical applications:
A: Electromagnets
B: Electric Bells
C: Electric Motors
D: Electric Motors
E: Speakers and Headphones
F: MRI
Q14. विद्युत
धारा के चुंबकीय प्रभाव के उपयोग लिखिए?
उत्तर:
विद्युत धारा के चुंबकीय प्रभाव के कई व्यावहारिक उपयोग हैं:
A: विद्युत चुंबक (Electromagnets)
B: विद्युत घंटियाँ (Electric Bells)
C: विद्युत मोटर (Electric Motors)
D: विद्युत मोटर (Electric Motors)
E: स्पीकर और हेडफ़ोन (Speakers and Headphones)
F:
MRI
Q15.
What is Electromagnet?
Ans.
The magnet that has a magnetic force when current is
passing through a conductor and loses the magnetic force when the current flow
stops.
Q15. विद्युत
चुंबक क्या है?
उत्तर: वह
चुंबक जो किसी चालक में से विद्युत धारा प्रवाहित होने पर चुंबकीय बल उत्पन्न करता
है और धारा का प्रवाह रुकने पर चुंबकीय बल खो देता है।
Q16. What is Magnetic field?
Ans.
The region around a magnet where its magnetic effect
can be felt.
Q16. चुंबकीय
क्षेत्र क्या है?
उत्तर: चुंबक
के आस-पास का वह क्षेत्र जहाँ उसके चुंबकीय प्रभाव को महसूस किया जा सकता है।
Q17.
What is Rechargeable Batteries?
Ans.
The batteries that can be charged multiple times and
used as a portable source of electricity.
Q17. रिचार्जेबल बैटरी क्या होती हैं?
उत्तर: ऐसी
बैटरी जिन्हें कई बार चार्ज किया जा सकता है और बिजली के पोर्टेबल स्रोत के रूप
में उपयोग किया जा सकता है।
Q18. What is
Resistance?
Ans. The property of certain metal conductors to oppose the flow
of current through them.
Q18. प्रतिरोध
क्या है?
उत्तर: कुछ
धातु चालकों का वह गुण जो अपने माध्यम से धारा के प्रवाह का विरोध करता है।
Q19.
Can we use electric current to make a magnet?
Ans.
Yes, the magnetic effect of the electric current is
used to make a magnet. If an electric current is passed through a long
conducting wire coiled around a metal nail or rod, the nail or rod becomes a
magnet during the flow of the current.
Q19. क्या
हम विद्युत धारा का उपयोग चुंबक बनाने के लिए कर सकते हैं?
उत्तर: हाँ, चुंबक बनाने के लिए विद्युत धारा के चुंबकीय प्रभाव का उपयोग किया
जाता है। यदि किसी धातु की कील या छड़ के चारों ओर लिपटे लंबे चालक तार से विद्युत
धारा प्रवाहित की जाए, तो धारा के प्रवाह के दौरान कील या छड़ चुंबक बन जाती है।
Q20.
Does an electromagnet also have two poles like a bar magnet?
Ans.
Electromagnets also have two poles like a bar magnet.
When an electric current is passed through a conducting wire coiled around an
iron nail, one end of the nail becomes the North pole of the magnet, and the
other end of the nail becomes the South pole of the magnet.
Q20. क्या
विद्युत चुंबक में भी छड़ चुंबक की तरह दो ध्रुव होते हैं?
उत्तर: विद्युत
चुंबक में भी छड़ चुंबक की तरह दो ध्रुव होते हैं। जब लोहे की कील पर लिपटे हुए
चालक तार से विद्युत धारा प्रवाहित की जाती है, तो कील का एक सिरा चुंबक
का उत्तरी ध्रुव बन जाता है और दूसरा सिरा दक्षिणी ध्रुव बन जाता है।
Q21.
Are electromagnets also used in real life, for lifting objects?
Ans:
Electromagnets are widely used in factories and scrap
yards to move, lift, and sort heavy metal items. These electromagnets are hung
to the cranes. The crane operator moves the hanging magnet with the crane to
heavy metal items and switches ON the current. And for release he switch
off the current.
Q21. क्या
वास्तविक जीवन में भी वस्तुओं को उठाने के लिए विद्युत चुम्बकों का उपयोग किया
जाता है?
उत्तर: भारी
धातु की वस्तुओं को स्थानांतरित करने, उठाने और छांटने के लिए कारखानों और कबाड़खानों में विद्युत चुम्बकों
का व्यापक रूप से उपयोग किया जाता है। ये विद्युत चुम्बक क्रेन से लटके होते हैं।
क्रेन ऑपरेटर लटके हुए चुम्बक को क्रेन के साथ भारी धातु की वस्तुओं तक ले जाता है
और करंट चालू कर देता है। और छोड़ने के लिए वह करंट बंद कर देता है।
Q22.
Who discovered the magnetic effect of electric current?
Ans.
Magnetic effect of electric current was discovered by
Hans Christian Oersted in 1820.
Q22. विद्युत धारा के चुंबकीय प्रभाव की
खोज किसने की थी?
उत्तर: विद्युत
धारा के चुंबकीय प्रभाव की खोज 1820 में
हंस क्रिश्चियन ओर्स्टेड ने की थी।
Q23.
Write the factors affecting of Electromagnet?
Ans:
Factors Affecting Electromagnet Strength:
Amount
of current: Increasing current (e.g., using 2 or more
cells instead of 1) strengthens the electromagnet.
Number
of turns: Increasing the number of turns in the coil
increases its magnetic strength.
Q23. विद्युत
चुंबक को प्रभावित करने वाले कारक लिखिए।
उत्तर: विद्युत चुंबक की शक्ति को
प्रभावित करने वाले कारक:
धारा की मात्रा: धारा बढ़ाने से (जैसे, 1 सेल की जगह 2 या उससे अधिक सेल का उपयोग करने से) विद्युत चुंबक मज़बूत होता है।
फेरों की संख्या: कुंडली में फेरों की संख्या बढ़ाने से उसकी चुंबकीय शक्ति बढ़ती
है।
Q24.
Describe the internal construction of a standard dry cell.
Ans:
A dry cell consists of:
1:A zinc container that serves as the negative terminal.
2:A carbon rod with a metal cap in the center that serves as the
positive terminal.
3:A moist paste electrolyte surrounding the carbon rod inside the
zinc container.
Q24. एक
मानक शुष्क सेल की आंतरिक संरचना का वर्णन करें।
उत्तर: एक
शुष्क सेल में निम्नलिखित घटक होते हैं:
1: एक जस्ता (जिंक) का पात्र जो ऋणात्मक टर्मिनल के रूप में कार्य करता
है।
2: केंद्र में धातु की टोपी वाली एक कार्बन छड़ जो धनात्मक टर्मिनल के
रूप में कार्य करती है।
3: जस्ता पात्र के अंदर कार्बन छड़ के चारों ओर एक नम पेस्ट
इलेक्ट्रोलाइट।
Q25.
Why are rechargeable batteries preferred over single-use dry cells?
Ans:
Rechargeable batteries can be reused multiple times by
recharging them, which prevents waste and saves money over time.
Q25. सिंगल-यूज़ ड्राई सेल की तुलना में
रिचार्जेबल बैटरी को क्यों प्राथमिकता दी जाती है?
उत्तर:
रिचार्जेबल बैटरी को बार-बार चार्ज करके इस्तेमाल किया
जा सकता है, जिससे कचरा कम होता है और समय के साथ पैसे की बचत होती है।
Q26.
Why should old or dead batteries be disposed of at e-waste facilities rather
than normal garbage?
Ans:
Dead batteries contain toxic materials and metals like
lead, cadmium, or lithium, as well as residual chemicals/acids. Throwing them
in ordinary trash can cause fires or pollute the soil and groundwater. E-waste
facilities allow these valuable materials to be safely recycled.
Q26. पुरानी
या मृत बैटरियों को सामान्य कचरे के बजाय ई-कचरा केंद्रों में क्यों निपटाया जाना
चाहिए?
उत्तर: मृत
बैटरियों में लेड, कैडमियम या लिथियम जैसी जहरीली सामग्री और धातुएं
होती हैं, साथ ही अवशिष्ट रसायन/अम्ल भी होते हैं। उन्हें सामान्य कचरे में
फेंकने से आग लग सकती है या मिट्टी और भूजल प्रदूषित हो सकता है। ई-कचरा केंद्र इन
मूल्यवान सामग्रियों को सुरक्षित रूप से पुनर्चक्रित करने की अनुमति देते हैं।
Q27.
Who invented Voltaic Cell?
Ans.
The voltaic cell was invented by the Alessandro Volta
in 1800.
Q27. वोल्टाइक सेल का आविष्कार किसने किया
था?
उत्तर: वोल्टाइक
सेल का आविष्कार 1800 में एलेसेंड्रो वोल्टा द्वारा किया गया था।
Q28.
Describe the internal construction of a voltaic cell or Galvanic Cell?
Ans.
A voltaic cell or Galvanic cell consists of:
1: Early electric cell consisting of two different metal rods (electrodes)
partially submerged in an liquid solution (electrolyte).
2: Chemical reactions between the electrodes and electrolyte
generate current.
Q28. वोल्टाइक
सेल या गैल्वेनिक सेल की आंतरिक बनावट का वर्णन करें?
उत्तर: वोल्टाइक
सेल या गैल्वेनिक सेल में ये चीजें होती हैं:
1: शुरुआती इलेक्ट्रिक सेल जिसमें दो अलग-अलग धातु की छड़ें (इलेक्ट्रोड)
होती हैं, जो आंशिक रूप से एक तरल घोल (इलेक्ट्रोलाइट) में डूबी होती हैं।
2: इलेक्ट्रोड और इलेक्ट्रोलाइट के बीच होने वाली रासायनिक प्रतिक्रियाओं
से करंट पैदा होता है।
Q29.
What is the main difference between a Voltaic cell and a Dry cell?
Ans:
A Voltaic cell uses a liquid electrolyte (like a weak
acid or salt solution) in a glass or plastic container, making it prone to
spilling and non-portable. A Dry cell uses a moist paste as an electrolyte
enclosed inside a zinc container, making it portable and easy to use.
Q29. वोल्टाइक
सेल और शुष्क सेल (Dry cell) में
मुख्य अंतर क्या है?
उत्तर: वोल्टाइक
सेल में कांच या प्लास्टिक के पात्र में तरल इलेक्ट्रोलाइट (जैसे कमजोर अम्ल या
नमक का घोल) का उपयोग होता है, जिससे इसके फैलने की संभावना रहती है और यह पोर्टेबल नहीं होता है।
शुष्क सेल में जिंक के पात्र के अंदर इलेक्ट्रोलाइट के रूप में नम पेस्ट का उपयोग
होता है, जिससे
यह पोर्टेबल और उपयोग में आसान होता है।
Q30.
Define the heating effect of electric current?
Ans:
The production of heat in a conductor when an electric
current passes through it due to resistance is called the heating effect of
electric current.
Q30. विद्युत धारा के तापीय प्रभाव को
परिभाषित करें?
उत्तर: प्रतिरोध
के कारण किसी चालक से विद्युत धारा प्रवाहित होने पर उसमें ऊष्मा उत्पन्न होने को
विद्युत धारा का तापीय प्रभाव कहते हैं।
Q31. Why is Nichrome wire used as a heating
element instead of Copper?
Ans: Nichrome
offers a higher resistance to the flow of electric current compared to a copper
wire of the same size and length, generating significantly more heat energy.
Q31. हीटिंग
एलिमेंट के रूप में तांबे के बजाय नाइक्रोम तार का उपयोग क्यों किया जाता है?
उत्तर: समान
आकार और लंबाई के तांबे के तार की तुलना में नाइक्रोम विद्युत धारा के प्रवाह के
लिए उच्च प्रतिरोध प्रदान करता है, जिससे काफी अधिक ऊष्मीय ऊर्जा उत्पन्न होती है।
Q32.
What factors determine the amount of heat generated in a wire?
Ans:
The heat generated depends on:
A:The material, thickness, and length of the wire.
B:The amount of current flowing through it.
C:The duration for which the current flows.
Q32. तार में उत्पन्न ऊष्मा की मात्रा किन कारकों पर निर्भर करती है?
उत्तर: उत्पन्न ऊष्मा निम्नलिखित पर निर्भर करती है:
A: तार का पदार्थ, मोटाई और लंबाई।
B: उसमें प्रवाहित होने वाली धारा की मात्रा।
C: धारा के प्रवाहित होने की अवधि।
33. Fill in the blanks:
(i) The solution used in
a Voltaic cell is called ___________.
(ii) A current-carrying
coil behaves like a _________.
33. Ans Key:
(i) electrolyte
(ii) magnet
34. रिक्त
स्थान भरें:
(i) वोल्टाइक सेल में प्रयुक्त घोल को ___________ कहा
जाता है।
(ii) धारावाही कुंडली एक _________ की
भांति व्यवहार करती है।
34. उत्तर
कुंजी:
(i) विद्युत
अपघट्य
(ii) चुंबक
35.
True or False:
(i)
Dry cells are less portable compared to Voltaic cells.
(ii)
A coil becomes an electromagnet only when electric
current flows through it.
(iii)
An electromagnet, using a single cell, attracts more
iron paper clips than the same electromagnet with a battery of 2 cells.
35. Ans Key:
(i)
False
(ii)
True
(iii)
False
36. सही
या गलत:
(i) वोल्टाइक सेल की तुलना में शुष्क सेल कम पोर्टेबल होते हैं।
(ii) कुंडली तभी विद्युत चुंबक बनती है जब उसमें से विद्युत धारा प्रवाहित
होती है।
(iii) एक सेल का उपयोग करने वाला विद्युत चुंबक, 2 सेल वाली बैटरी वाले उसी
विद्युत चुंबक की तुलना में अधिक लोहे की पेपर क्लिप्स को आकर्षित करता है।
36. उत्तर
कुंजी:
(i) गलत
(ii) सही
(iii) गलत
Q.
Multiple Choice Questions/बहु-विकल्पीय प्रश्न:
37:
An electric current flows through a nichrome wire for a short time.
(i)
The wire becomes warm.
(ii)
A magnetic compass placed below the wire is deflected.
Choose
the correct option:
(a)
Only (i) is correct
(b)
Only (ii) is correct
(c)
Both (i) and (ii) are correct
(d)
Both (i) and (ii) are not correct
Ans:
(c) Both (i) and (ii) are correct
नाइक्रोम के तार से कुछ समय के लिए
विद्युत धारा प्रवाहित होती है।
(i) तार
गर्म हो जाता है।
(ii) तार
के नीचे रखा चुंबकीय कंपास विक्षेपित हो जाता है।
सही विकल्प चुनें:
(a) केवल
(i) सही है
(b) केवल
(ii) सही है
(c) (i) और
(ii) दोनों सही हैं
(d) (i) और
(ii) दोनों सही नहीं हैं
उत्तर: (c) (i) और (ii) दोनों सही हैं।
38.
Nichrome wire is commonly used in electrical heating devices because it
(i)
is a good conductor of electricity.
(ii)
generates more heat for a given current. (iii) is cheaper than copper.
(iv)
is an insulator of electricity.
Ans: (ii) generates more heat for a given current.
38:
नाइक्रोम तार का उपयोग आमतौर पर बिजली के हीटिंग उपकरणों में किया जाता है क्योंकि
यह
(i)
बिजली
का अच्छा सुचालक है।
(ii)
दिए
गए करंट के लिए अधिक गर्मी उत्पन्न करता है। (iii)
तांबे
की तुलना में सस्ता है।
iv) बिजली
का कुचालक है।
उत्तर: (ii) समान धारा के लिए अधिक ऊष्मा उत्पन्न करता है।
39. Match
Column A with Column B:
|
|
Column A |
|
Column B |
|
(i) |
Voltaic cell/ वोल्टाइक सेल |
(a) |
Best suited for electric heater
/ इलेक्ट्रिक हीटर के लिए सबसे उपयुक्त |
|
(ii) |
Electric iron/ विद्युत प्रेस |
(b) |
Works on magnetic effect of
electric current / यह विद्युत धारा के
चुंबकीय प्रभाव पर काम करता है। |
|
(iii) |
Nichrome wire/ नाइक्रोम तार |
(c) |
Works on heating effect of
electric current / यह विद्युत धारा के
ऊष्मीय प्रभाव पर काम करता है। |
|
(iv) |
Electromagnet/ विद्युत चुम्बक |
(d) |
Generates electricity by
chemical reactions/ रासायनिक अभिक्रियाओं से
विद्युत बनाता है। |
Ans Key:
|
(i) |
(c) |
|
(ii) |
(b) |
|
(iii) |
(d) |
|
(iv) |
(a) |
39.
Electric heating devices (like an electric heater or a stove) are often
considered more convenient than traditional heating methods (like burning
firewood or charcoal). Give reasons to support this statement, considering
societal impact.
Ans: Traditional methods like burning firewood or charcoal are
NOT convenient because:
(i): More space in the household is required to store dry firewood
or charcoal.
(ii): The smoke arising from the burning of firewood or charcoal is
a health hazard. It gives a burning sensation to the eyes and makes breathing
difficult.
(iii): The burning of firewood or charcoal releases harmful gases
like carbon dioxide and carbon monoxide. These gases pollute the air we breathe
and, therefore, are not good for our environment.
Electric heating devices, like an electric heater or stove, are
more convenient as they need less space and do not cause pollution.
39. इलेक्ट्रिक
हीटिंग डिवाइस (जैसे इलेक्ट्रिक हीटर या स्टोव) को अक्सर पारंपरिक हीटिंग तरीकों
(जैसे लकड़ी या कोयला जलाना) की तुलना में ज़्यादा सुविधाजनक माना जाता है।
सामाजिक असर को ध्यान में रखते हुए इस बात के समर्थन में कारण बताइए।
उत्तर: लकड़ी
या कोयला जलाने जैसे पारंपरिक तरीके सुविधाजनक नहीं हैं क्योंकि:
(i): सूखी लकड़ी या कोयले को रखने के लिए घर में ज़्यादा जगह की ज़रूरत होती है।
(ii): लकड़ी या कोयला जलाने से निकलने वाला धुआं सेहत के लिए नुकसानदायक होता है। इससे आंखों में जलन होती है और सांस लेने में तकलीफ़ होती है।
(iii): लकड़ी या कोयला जलाने से कार्बन डाइऑक्साइड और कार्बन मोनोऑक्साइड
जैसी हानिकारक गैसें निकलती हैं। ये गैसें हमारी सांस लेने वाली हवा को प्रदूषित
करती हैं और इसलिए हमारे पर्यावरण के लिए अच्छी नहीं हैं।
इलेक्ट्रिक हीटिंग डिवाइस, जैसे इलेक्ट्रिक हीटर या
स्टोव, ज़्यादा
सुविधाजनक होते हैं क्योंकि उन्हें कम जगह की ज़रूरत होती है और इनसे प्रदूषण नहीं
होता है।
38.
Suppose Sumana forgets to move the switch of her lifting electromagnet model to
the OFF position (in the introduction story). After some time, the iron nail no
longer picks up the iron paper clips, but the wire wrapped around the iron nail
is still warm. Why did the lifting electromagnet stop lifting the clips? Give
possible reasons.
Answer:
A conducting coil becomes a magnet ONLY when the
electric current is flowing through it (magnetic effect of electric current).
When the flow of electric current is stopped, the coil loses its magnetic
effect.
The magnetic effect of electric current remains in the conducting
wire (coil) during the current flow only. The heating effect of electric
current converts a part of the electric energy to heat energy. This heat energy
makes the current-carrying wire warm.
When the current stops flowing the heating effect of the electric
current stops, but the wire that has become warm takes some time before cooling
to the normal temperature.
38. मान
लीजिए सुमना अपने लिफ्टिंग इलेक्ट्रोमैग्नेट मॉडल के स्विच को ऑफ पोजीशन पर ले
जाना भूल जाती है (परिचय कहानी में)। कुछ समय बाद,
लोहे
की कील लोहे के पेपर क्लिप को नहीं उठाती है,
लेकिन
लोहे की कील के चारों ओर लिपटा तार अभी भी गर्म है। लिफ्टिंग इलेक्ट्रोमैग्नेट ने
क्लिप को उठाना क्यों बंद कर दिया? संभावित
कारण बताएं।
उत्तर: एक सुचालक
तार तभी चुंबक बनती है जब उसमें से विद्युत प्रवाह बह रहा हो (इलेक्ट्रिक करंट का
चुंबकीय प्रभाव)। जब विद्युत प्रवाह बंद हो जाता है, तो कॉइल अपना चुंबकीय प्रभाव खो देता है।
विद्युत् धारा का चुंबकीय
प्रभाव सुचालक तार (कॉइल) में केवल विद्युत् प्रवाह के दौरान ही रहता है। विद्युत्
धारा का उष्मीय प्रभाव विद्युत् ऊर्जा के
एक हिस्से को ऊष्मीय ऊर्जा में बदल देता है। यह ऊष्मीय ऊर्जा विद्युत् ले जाने वाले तार को गर्म बनाती
है।
जब विद्युत् धारा बहना बंद
हो जाता है तो विद्युत् धारा का ऊष्मीय प्रभाव बंद हो जाता है |
Comments
Post a Comment